Products / Biomass
PS - Summary
Fully Welded Twin Wall Flue System.
High pressure, twin wall, flanged joint, bright finish stainless steel flue system with removable cover band for commercial/industrial applications with flue gases, condense, fume and process exhausts from gas, oil and solid fuel appliances, diesel generators, with a maximum normal operating temperature of 600 deg C and pressures up to 5000Pa.
- Available in sizes from 150 to 1250 mm
- This product is made to order
- Maximum operating temperature 600 deg C
- Standard finish is: Stainless finish
- 1 year manufacturer's warranty for all products installed and maintained in accordance with the installation and usage notes.
- All products can be powder coated to any BS or RAL colour code
PS is suitable for use on the following applications:
PS Description:
- Lightweight pre-fabricated fully welded pressure system, suitable for continuous high temperature pressure applications. Easy and quick to install with flanged joints, V band system. Available in sizes from 125mm i/dia to 1250mm i/dia. Suitable for use on condensing appliances.
Joint Type
Flanged end fitted with V Band and locating spigot. To be installed with a cover band in place.
PS Installation and Usage Notes
All flue system installations, i.e. oil, gas, solid and multi fuel, should be carried out by a suitably qualified installer or Building Control Department permission must be granted.
For detailed installation guidelines please refer to:
- The relevant Technical Information and Installation Instructions
- Building Regulations
- Planning Office
- Appliance Manufacturers Operating and Maintenance Instructions
- Relevant British Standards
3 Downloads Available:
Product Summary Sheet pdfProduct Brochure pdf - 1.82 mb
Operating and Maintainance pdf - 0.08 mb
